10 ㎡ Low Noise and Energy industrial freeze dryer machine for sale
main feature:
Pre-freeze drying in situ, to reduce the tedious operation of the drying process;
Silicone oil as a circulating medium, high precision temperature control, shelf temperature ≤ 1 ℃, uniform drying effect;
· Shelf temperature adjustable, controllable, fumble, pilot and production processes;
· As the drying chamber and cold trap for the split structure, water capture ability, short drying time;
Touch screen operation, PLC control, display drying curve;
Square tray is not deformed, easy to operate, easy to clean;
Inflatable valve configuration, can be filled with dry inert gas;
Optional with eutectic point test device.
· Optional host computer software to achieve remote control.
· Optional ozone disinfection function
Technical advantages:
· Refrigeration system protection and regulation device: the use of internationally renowned brands of products, accurate, stable, safe and reliable.
High-pressure protection system: When the system exhaust pressure exceeds the allowable pressure, automatically cut off the freezer operation, to prevent accidents.
Medium-pressure pressure regulation system: In a two-stage refrigeration system, the appropriate intermediate pressure on the cooling system performance and life are crucial. When the intermediate pressure is lower than the set value, the system will automatically start to adjust. To create a condition for the unmanned operation of lyophilizer.
* Hydraulic pressure protection system: When the freezer is in a long run state, the freezer at any time to monitor the hydraulic pressure to prevent the refrigerator due to lack of oil damage.
· Motor temperature protection system: When the freezer motor temperature is higher than the set value, in order to protect the freezer, the system will automatically stop the freezer operation.
· Low Temperature Oil Return Regulating System: It is important how to return the refrigeration oil smoothly to the crankcase when the freezer is operating at very low evaporating temperature for a long time (the freezer is often "burned" in a system lacking refrigeration oil) . When there is a lack of freezer oil in the crankcase, the automatic start-up of the system will establish a suitable oil level in the crankcase. To create a condition for the unmanned operation of lyophilizer.
· Exhaust temperature control system: When the freezer exhaust temperature is too high, the system automatically starts the cooling system to prevent high-pressure part of the over-temperature operation. To create a condition for the unmanned operation of lyophilizer.
Moisture-proof stroke adjustment system: When the freezer is in high-load operation, the system can automatically enter the adjustment process, moisture-proof stroke or even "liquid hammer" phenomenon. To create a condition for the unmanned operation of lyophilizer.
· Automatic liquid receiving device: When the freezer is in standby mode, the device automatically runs back the system to retain the refrigerant in the tank, in order to facilitate the boot again.
Machine start protection: When all the safety conditions of the equipment are available, the whole machine can start running.
Machine structure: vertical, front and rear split rack (easy to transport, in place).
Specifications:
ZG-10㎡ | ||
Construction |
Technical parameters |
Remark |
Base Structure | ||
Effective area of shelves |
10㎡ |
|
Input capacity |
100kg/batch |
|
Maximum Condenser capacity |
120Kg/batch |
Could be changed to follow customer’s country voltage |
Power supply |
380V/50Hz/3P |
|
Power consumption |
33.35Kw |
380V/50Hz/3P |
Cooling Water |
10T/Hr (T<28℃, P=0.1-0.15MPa) |
Recyclable |
Machine size(L*W*H) |
4540*1400*2450mm |
subject to the actual design |
Main Structure |
Unity type |
|
Weight |
3800 Kg |
|
Drying Oven | ||
Dry Chamber Material |
SUS304/ 6mm thick |
|
Dry Chamber Shape and dimension |
Cylinder Φ1200×1900 |
Drying chamber+Condencer Φ1300×3280 |
Door lock |
Hand knob lock |
|
Door Open direction |
Right to left |
Decided by customer |
Open angle |
>110° |
|
Door material |
SUS304 |
|
Surfaceness |
Ra≤0.5um |
|
Observation window |
Frost-resistant glass |
Installed on the front |
Door seal |
Medical o section silicone rubber seal |
|
Temperature sensor |
T-type thermocouple |
|
Shelves | ||
Shelf material |
SUS304 |
|
Shelf Surfaceness |
Ra≤0.5um |
|
Shelf quantity.(pc) |
11+1 Layers |
The top layer of the shelves is temperature compensation |
Stainless steel tray |
395*395*30/ 2mm thick |
66pcs |
Distance between shelves |
75 mm |
|
Shelf dimension(L*W*H) |
1190*800*15*2 |
|
Shelf lowest temperature |
-55℃ |
|
Shelf highest temperature |
+70℃ |
|
Shelf Cooling Rate |
+20~-40℃≤60min |
No-load |
Heating power consumption |
8Kw/380V/50Hz |
|
Shelf fence |
prevent the tray cross over the shelf |
|
Condenser | ||
Condenser Material |
SUS304/ 6mm thick |
|
Shape and dimension |
cylinder ¢1200*900 |
|
Coil pipe material |
SUS304 |
|
Coil shape |
Circular coil pipe |
|
Coil pipe water catching area |
≥12㎡ |
|
Refrigerant |
R404a |
|
Condenser lowest temperature |
-65℃ |
|
Cooling rate |
+30~-40℃≤30min |
|
Observation Window |
Frost-resistant glass |
Installed on the side |
defrosting method |
spray + immersion |
|
Temperature sensor |
T-type thermocouple |
|
Refrigerating Unit | ||
Compressor. |
BITZER 25HP two-stage motor |
1set |
Power consumption |
18.75Kw |
|
Refrigerant |
R404a |
|
Shelf temperature uniformity |
+/-1℃ |
|
Oil separator |
Tianjin Fasike |
1set |
Oil Filter |
Emerson (America) |
1set |
Oil pressure differential controller |
Shanghai Fengshen |
1set |
Gas-liquid separator |
Emerson (America) |
1set |
Dehumidification drying filter |
Emerson (America) |
1set |
Manometer |
Bingwu |
3set |
High/low voltage protection relay |
Danfoss (Danmark) |
1set |
water-cooled condenser |
Zhejiang KAIDI |
1set |
Corrugated Damping Pipe |
Bingwu |
2pcs |
Manual stop valve |
Bingwu |
1set |
Refrigerating solenoid valve |
Emerson (America) |
1set |
Expansion valve |
Danfoss (Danmark) |
1set |
Red Copper Pipe |
φ16,φ12,φ10 |
|
Refrigeration Return-pipe |
φ38 Stainless steel seamless pipe |
|
Vacuum System | ||
Vacuum Pump |
LEYBOLD D40B 2.2KW |
2sets |
Roots vacuum pump |
LEYBOLD WAU251 1.1KW |
1set |
Corrugated pipe |
Φ76 |
Vacuum Pipe Shock Resistance |
Pump air flow |
100L/S |
|
Power consumption |
5.5Kw |
|
Butterfly valve |
Ningbo GI-63 |
|
vacuum solenoid valve |
Ningbo DDC-40 |
Automatic open or close with vacuum pump |
vacuum gauge |
ZJ-54D |
|
Final vacuum |
≤1Pa |
No-load |
Pumping rate |
From the atmospheric pressure dropped to 133 Pa≤20min |
|
Circulation system | ||
Pipe material |
304 seamless pipe |
|
Circulation pump |
Denmark Grundfos 1.1KW |
1set |
Power consumption |
9.1 Kw |
|
Ball valve |
Shanghai DG40 |
Comply with the standard of Q/IAKX002-97 |
Circulating fluid |
Multiple fluid |
|
Heat exchanger |
ALFA LAVAL (Sweden) |
1set |
Heating rate |
>1℃/min |
|
Heating method |
Electric Heating pipe 4KW*2pcs 8Kw |
|
Control method |
Manual/Auto control |
|
Heater dimension |
Φ219×300 |
|
Circulating fluid tank dimension |
¢300*400 |
|
Control system | ||
System Monitoring Software |
Hangzhou Kassel |
1set |
Vertical control cabinet |
Hangzhou Kassel |
Control, record |
PLC |
SIEMENS CPU 226 CN AC/DC/relay |
1set |
Thermocouple extension module |
SIEMENS EM 231 CN 4(4 TC) |
1set |
Analog input module |
SIEMENS EM 231 CN(4 AI) |
1set |
HMI |
Taiwan Panel Master PT070 |
1set |
Cable of HMI and PLC |
Hangzhou Kassel |
|
Constant current |
Hangzhou Kassel |
1 |
Switching Power Supply |
Taiwan MW companies / 24V/5V |
24V 1pc |
Temperature sensor |
T-type thermocouple |
|
vacuum gauge |
Shandong ZJ-54D |
2 |
AC contactor |
SCHNEIDER |
|
Air-break |
SCHNEIDER |
|
Competitive Advantage:
1) We have applied the CE, ISO9001 certificate for our products and get the good technical test report, who is the international famous third party test institute.
2) Our products are designed and produced completely according to European standard, which are oriented as high efficiency and high quality.
3) We have applied the CE, ISO9001 certificate for our products and get the good technical test report, who is the international famous third party test institute.
If the 10 ㎡ low noise and energy industrial freeze dryer machine for sale caters to your requirement, welcome to buy the precise equipment made in China from our factory. We are one of the professional manufacturers and suppliers in China who can offer you unmatched services and prices. And the customized service is also available. Don't hesitate any more.
http://www.kassel-temperaturecontroller.com/